Product Detail

POWER 802.3AT POE INJECTOR

Quick Overview
The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are...

$149.00

Add to Wishlist

The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible devices. Check the access point specifications to ensure compatibility.

FEATURES & BENEFITS

Easy Installation

Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

TECHNICAL SPECIFICATIONS

Power

  • Input Voltage: 100 to 240 VAC
  • Input Current: 0.8A maximum
  • AC Input Frequency: 50-60 Hz
  • Maximum Output Power: 30 W
  • Powered device can be up to 100m away from power injector

Data

  • Compatible with 10/100/1000 Mbit/s Ethernet, full duplex

Environmental

  • Operating Temperature: (32 to 104°F (0 to 40°C)
  • Storage Temperature: (-4 to 158°F (-20 to 70°C)
  • Operating Humidity: 5 to 93%

Additional Features

  • Short-circuit protection

Physical Dimensions

  • 6.3” x 2.1” x 1.4” (160 mm x 52.5 mm x 35.5 mm)
  • Weight: 0.46 lb (210 g)

Mounting

  • Mounts to walls (anchors and screws not included)

Compatibility

  • Complies with 802.3at standard
  • Backward compatibility with 802.3af MR-series access points

LED Indicators

  • Input Power
  • Fault
  • Detect/connected to valid 802.3at load

Ordering Information

  • MA-INJ-4-US Meraki 802.3at Power over Ethernet Injector (US plug)
  • MA-INJ-4-EU Meraki 802.3at Power over Ethernet Injector (EU plug)
  • MA-INJ-4-UK Meraki 802.3at Power over Ethernet Injector (UK plug)
  • MA-INJ-4-AU Meraki 802.3at Power over Ethernet Injector (AU plug)

Purchasing & Delivery

Delivery

Always free shipping

Warranty Information

If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the device hardware is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned. Note that, for end-customer device security, RMAs may only be requested by Full Organization Write Admins, or Network Write Admins (for only devices in networks they are Admins of). Meraki Support will not process RMAs unless the support agent can verify the requester has sufficient network permissions. If you have not received a pre-paid shipping label in the box, please check your email inbox and spam folders 24-48 business hours after the replacement has been received for an email from FedEx or UPS to print the return label. More information can be found here on Cisco’s website; https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Returns_(RMAs)%2C_Warranties_and_End-of-Life_Information Hardware Returns If you are experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard (Help > Get help) or by calling us. To request a return materials authorization (RMA), please complete the RMA request form in the Meraki dashboard. If your RMA request is approved, Cisco Meraki will email you an RMA number and a return shipping label free of charge. We will ship replacement units within five business days of receiving your defective units. If no trouble is found, we will contact you before taking further action. If you require advance replacement, please call Cisco Meraki technical support. Advance replacement orders will ship within 1 business day. Additional information about Cisco Meraki’s hardware warranty can be found in Cisco Meraki’s End Customer Agreement. Refund Requests If you are dissatisfied with your Cisco Meraki purchase for any reason, you may return your order for a full refund. All returns must meet the following criteria: You purchased the product through an authorized Cisco Meraki reseller or direct from Cisco Meraki You are the original purchaser of the product You submit your refund request within 30 days of purchase The product is in new condition, including all accessories in the original packaging To request a refund, please complete our RMA request form. If your refund request is approved, Cisco Meraki will email you an RMA number. In order for the refund to be accepted and processed, Meraki must receive the hardware you are returning no later than 30 days following the date the RMA number is issued. Once we have received and inspected the units, we will process your return. If you purchased through a Cisco Meraki reseller, your refund will be issued by that reseller. If you purchased directly from Cisco Meraki, we will issue a refund, typically within 15 days of receiving the return. (If you paid by credit card we will credit the original credit card. If you paid by any other method, we will send you a check.) From time to time Cisco Meraki offers special refund terms. If your return is covered by special terms, please reference those terms on your RMA request. Please contact Cisco Meraki directly for all returns, including product purchased through distributors or resellers.